Install the firmware
Plug an ESP32-S3 N8R8 into USB and flash the firmware straight from your browser, with nothing to install. No command-line tools required.
- 1
Connect the MusicBox
Plug the ESP32-S3 N8R8 in over USB and grant the serial port, once for everything.
- 2
Choose and flash
Pick a version, the firmware installs over the same connection.
- 3
Get your access code
The PoP code appears on its own.
- 1
Connect the MusicBox
Plug your MusicBox (or bare ESP32-S3 N8R8) in over USB and open the serial link: it's the only permission you'll grant, everything else on this page uses it.
Pick the board's serial port in the browser prompt.
- 2
Choose and flash
Pick a version, then flash the firmware over the step 1 connection. MusicBox already flashed? Skip straight to step 3.
BetaThe firmware is currently in beta. It works, but expect a few rough edges.
Loading builds…
Connect the MusicBox in step 1 first.
- 3
Your access code and registration
Your MusicBox's access code (PoP) is read automatically.
Connect the MusicBox in step 1 first to read its access code.
Connect the MusicBox to see its logs here.
If something goes wrong during the flash, copy the logs before asking for help.